Proud Veteran Owned Business Member!

Frequently Asked Questions

Transmission Lookup


Differential Cover, Rear, AAM 11.5", 14 Bolt, For Ram 2500, 2014 and Newer, Polished

<< Previous in Differential Covers Next in Differential Covers >>
Differential Cover AAM 11.5" 14 Bolt Ram 2500 2014 up
Price: $375.00
Part Number: TAT-11147-P-PL
Volume: about 1/2 quart over stock at factory fill level

Dimensions: About 3/8 inch deeper than stock.

Designed for 2014 and newer Ram 2500
Clears sway and pan hard bars for the coil suspension, no modifications needed
Additional capacity: approximately 1/2 quart over stock at factory fill level
Fins for dissipating heat from fluid
Level check holes on side at the stock fill level line and at stock fill level hole
Fill holes on top and the side
Drain on bottom for easy servicing
Boss (unmachined) if needed for temperature sending unit
Cover comes with new mounting bolts, fill plugs, and magnetic drain plug, all included
PML standard top quality heavy duty sand cast aluminum construction
Ram 2500, 2014 to 2017
Ram 2500, 2003 to 2013, with the high output diesel, 5.9 diesel or 6.7 diesel (can also use PML Part Number 10361)
Ram 2500 Mega Cab, 2006 to 2013, with the 5.7 Hemi, 5.9 diesel, or 6.7 diesel (can also use PML Part Number 10361)
Ram 3500, 2003 to 2016 (can also use PML Part Number 10361)
2014, 2015, 2016 and 2017 Ram 2500 trucks feature coil suspension and have a sway (stabilizer) bar and pan hard rod right behind the stock cover. This cover works without modification on trucks with or without the optional air suspension add-on to the link coil suspension.

This rear cover fits the American Axle 11.5, 11.8 inch (300mm, 292mm) ring gear, 14 bolt differential, found on many Ram trucks, 2003 and newer. Trucks without the pan hard and sway bars can also use PML Part Number 10361.

Always check your truck to verify your differential and clearance.

Our thanks to those who have provided information and pictures of their trucks and worked with us during development of this cover.

Level Check and Fluid Fill Holes
Fill hole is near the top of the cover, about the 1 o'clock position. The top level check hole can also be used to fill.

This PML differential cover has two level check holes. The bottom of one hole is at the same location as the bottom of the stock cover oil fill hole. The bottom of the other hole is at the same location as the stock cover fluid level line. Follow your factory directions to fill with the correct amount of fluid.

Stock Cover Level Info   Fluid Level Info   PML AAM Diff Cover For New Dodge Trucks, next to stock cover 
Click on an image to view larger.

Both the stock cover fluid level line and the fill hole are on the face of the stock cover. PML puts the holes on the side for easier access.

Note: Locations are approximate. Installer must verify fit and fluid capacity.

Optional Machining for Temperature Sending Unit
This cover will also have an undrilled boss for a temperature sensor. It can be machined for a 1/8 NPT. If you want PML to drill and tap the boss, there is a $45 machining charge.

Front Cover for 4WD Trucks
PML makes a front differential cover these Dodge Ram trucks. On our front covers, PML keeps the profile close that of the stock cover to avoid interference with the steering, frame or suspension.

2013 and newer Ram 3500 and 2014 and newer Ram 2500 trucks have a round front end stock cover with 12 bolts. Please see PML's 12 bolt front differential cover.

Pre 2013/2014 trucks have the AAM 9.25 14 bolt cover and would need PML's 14 bolt front differential cover.

Product Reviews

(0 Ratings, 0 Reviews)
Click Manufacture Category below for better navigation
WE HAVE HUNDREDS OF PARTS NOT LISTED!! If you cannot find the part you are looking for give us a call @ 1-877-406-0617 and we will be glad to help. Monday - Friday 8am - 5pm CST
Browse Categories
Shopping Cart
Your cart is empty.

Our Builders Recommend: