|Frequently Asked Questions|
Dodge 68RFE, 545RFE, 45RFE Deep Transmission Pan
Price: From $235.79 to $348.77
Fits Ram 1500 with 4.7 or Hemi engine, 2WD Dakota & Durango, Jeep Grand Cherokee & Liberty CRD.
Volume: 3.1 qts over stock for 2WD, 2.5 qts for 4WD.
Number of Bolts: 15
This PML deep oil pan for Dodge RFE transmissions is a direct replacement on these vehicles:
Ram 2500 & 3500, 2WD and 4WD, with 6.7 liter diesel engine, 2007Â½ and newer (The 3500 HD Cab & Chassis has the Aisin transmission so this pan will not work)
Ram 1500 with Hemi engine, 2002 - 2005
Ram 1500 with 4.7 V8 engine, 2002 and newer
2WD Dakota with 4.7 V8 engine, 2000 - 2004
2WD Durango with 4.7 V8 engine, 2000 - 2003
Jeep Grand Cherokee with 4.7 V8 engine, 1999 - 2004
Ram 1500 with Hemi engine, 2006 & newer (exhaust)
Ram 2500 & 3500 with Hemi engine (exhaust)
4WD Dakota 2000 - 2004 and 4WD Durango 2000 - 2003 (frame)
Dakota 2005 & newer and Durango 2004 & newer (frame)
Durango with Hemi engine (check for clearance with a catalytic converter in the front)
Jeep Grand Cherokee with Hemi engine: (check for clearance with a catalytic converter in the front)
Liberty CRD, 20052006 (check skid plate and see installation below)
Wrangler 20102011 2.8 Diesel (check skid plate)
Grand Cherokee, 20052010 (check skid platebr />
For PML part numbers 10304 and 11039, you can use either filter.
For PML part numbers 11078 and 11079, you must use the 4WD filter as the step in the pan will not accommodate a 2WD filter.
Part numbers for 4WD filters that will work:
WIX: 58843 (kit)
The filter referred to as the 2WD filtter, has a short inlet pipe toward the rear of the filter. The other filter is called a 4WD filter and the inlet tube is longer and toward the center of the filter. We have been told that around 2007 Dodge began using 4WD filters on 2WD vehicles.
PML Transmission Pan Features:
Increased oil capacity for cooler temperatures
Sand-cast aluminum with raised fins
3/16-inch thick wall construction to add strength to the transmission case
3/8-inch thick gasket flange will not bend when bolts are tightened
Machined gasket surface for a secure seal
Boss cast into pan can be machined for a temperature sensor
Magnetic drain plug for easier, less messy maintenance
Mounting hardware provided
|Our Builders Recommend: