Proud Veteran Owned Business Member!

Frequently Asked Questions

Transmission Lookup


Transmission Pan, Ford C6 Stock Capacity, Polished

<< Previous in Transmission Oil Pans Next in Transmission Oil Pans >>
Transmission Pan Ford C6
Price: $430.00
Part Number: TAT-11064-P-PL

Volume: stock to 1 quart over stock depending on application

Dimensions: Click here for dimensions. Although this pan is stock capacity, it is still larger than a stock pan. Always check your vehicle for clearance before ordering.

Number of Bolts: 17

PML's stock capacity transmission pan for Ford C6 transmissions maintains ground clearance for full size 1960's and 1970's cars. This pan provides the strength and cooling benefits of an cast aluminum transmission pan for cars similar to our deep C6 pan for trucks.

The Ford C6 transmission is found on many full size Ford, Lincoln and Mercury cars, for example:

  • 66 – 69 Comet
  • 67 – 78 Cougar
  • 64 – 70 Fairlane
  • 66 – 74 Galaxie
  • 66 – 79 Lincolns
  • 66 – 80 LTD
  • 77 – 79 LTD II
  • 66 – 72 Meteor
  • 68 – 76 Montego
  • 68 – 74 Monterey
  • 66 – 79 Ranchero
  • 66 – 79 Thunderbird
  • 68 – 76 Torino

These classic Fords had options for several different transmissions. The C4, Cruise-o-Matic, and manual transmissions were also common. Please verify your transmission and look for any interference with a larger aftermarket pan before ordering. This pan may not clear cross members, generally found on Ford trucks and SUVs.

PML also makes an extra capacity Ford C6 transmission pan for Ford trucks and SUVs with the C6. The deep pan provides provides extra fluid for F250 and F350 trucks which have more room for a larger pan. PML's deep C6 pan is stepped in the front and back to clear frame cross members on trucks and SUVs.

PML Ford C6 tranny pans, PML and stock

The image at left shows three stock Ford C6 tranny pans with the PML deep and stock capacity pans. (Click on image to view larger picture.)

PML Ford C6 stock capacity tranny pan, inside

Inside of the pan shown here.

PML designed this pan to work with stock gaskets and filters. Filter supports are not needed as the filter bolts on to the valve body. The fluid level is at the same place with a PML pan or a stock pan so an extension is not needed.

Ford C6 transmission filter kits

This shows two possible filter kits for Ford C6 transmissions. They both include a rubber-cork type gasket, which we recommended for use with a PML transmission pan.

These are from Fram and have part numbers FT1025a and FT1037a (longer pick-up spout).

In 2014, PML added bosses to the outside out the pan, one on the driver's side and one on the passenger's side. These are areas that optionally can be machined for a temperature sending unit.

PML Transmission Pan Features:

  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to the transmission case
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal
  • Boss cast into pan can be machined for a temperature sensor
  • Drain hole and magnetic drain plug for easier, less messy maintenance

All PML transmission pans ship with new mounting bolts and a magnetic drain plug.

If you would like PML to machine your pan for a temperature sending unit, there is an additional charge of $45 .

Find out why you should buy a PML transmission pan.

Learn more about finishes and construction of PML parts.

For a larger picture, please click on one of the above images. A separate window or tab will open showing a bigger picture. (The larger pictures take a minute to display.)

Product Reviews

(0 Ratings, 0 Reviews)
Click Manufacture Category below for better navigation
WE HAVE HUNDREDS OF PARTS NOT LISTED!! If you cannot find the part you are looking for give us a call @ 1-877-406-0617 and we will be glad to help. Monday - Friday 8am - 5pm CST
Browse Categories
Shopping Cart
Your cart is empty.

Our Builders Recommend: