Transmission Pan, GM 200-4R Stock Capacity, Black, Powder Coated

Volume: Stock

Dimensions: Click here for dimensions. Overall height is 3 1/8 inches. Although this pan is stock capacity, it is still larger than the stock pan. Always check your vehicle for clearance before ordering.

Number of Bolts: 16

This PML pan fits many models of rear wheel drive cars with 4-speed automatic transmissions. GM used this transmission from 1982-1990. Examples of vehicles using the 200-4R transmissions are:

• Buick Regal T Type
• Grand National
• Chevrolet Monte Carlo SS

The 200-4R (also know as the 200 R4) transmission is popular replacement transmission for high performance applications.

PML designed this pan to meet the demands of high performance cars that require a lower profile than our extra capacity 200-4R deep pan. The pan has several improvements over a stock pan: stiff construction, fins and aluminum material for cooling, drain hole, temperature sensor boss, thick machined gasket flange for a secure seal, and filter supports

Inside of PML 200 4R Pan

Click on image to see a larger picture of the inside of the pan. A separate window will open and load the image.

The four rectangular areas on the bottom of the pan are the filter supports. The drain is at the top, right of the picture.

Filter Information

PML 200 4R transmission pans have filter supports so a filter extension is not needed.

The supports hold the filter at the same level as the stock pan. The distance from the bottom of the stock pan to the top of the flange is 2.4 to 2.6 inches. The distance from PML filter supports to the top of the flange is the same. The stock filter is about 4.8 inches tall. This shows the inside of the stock and PML 200 4R pans:

This PML pan works with stock filters. Some customers have reported to us that a 700R4 filter may also work with our 200 4R transmission pans.

Filter information is provided for reference only. Installer should verify transmission, filter and fitment based on the individual vehicle.

Drain Location and Optional Temperature Sending Unit Machining

The PML 200 4R transmission pan has two bosses (thick areas) on the casting for drilling and tapping.

The location on the driver side is drilled and tapped for the drain. A magnetic drain plug is included with each pan.

The boss on the passenger side of the pan is not machined. If needed, it can be drilled and tapped for a temperature sending unit. For PML to machine the hole, there is a $45.00 charge.

PML Transmission Pan Compared to Stock

    
Click on image to view larger.

These images show this PML transmission pan compared to the stock pan.